Table of Contents
Advertisement
12
Use in the field
12.1
Manual output
Press on the field in the work display to select the
function.
Manual feed (filling of seed disc in seed meter) Rotates
seed discs and feed rollers when the machine is in the
raised position. Rotate the seed discs so that all the holes
are filled when operation begins. Gives immediate
output of seed when the machine is lowered to the
drilling position.
•
For manual output to work, the symbol must be
showing green, see "2.6.1 Button functions".
Green symbol = output enabled. Hold in the button so
that output occurs without the machine being driven
forward. Used when starting at a corner, for example, or
during output check.
White symbol = output disabled.
Default value for driving speed for which the
output is to be set is done in the basic settings
menu.
12.2
Transport position
Press on the field in the work display to select the
function.
Transportation mode activates switching between
transportation and working modes. Applies only to
Tempo F
12.3
LowLift
Press on the field in the work display to select the
function
Green symbol = LowLift enabled. Used when the seed
coulters are lifted out of the earth and output stops, at the
same time as the following harrow is to continue to work
on the surface.
White symbol = HighLift/LowLift disabled.
The machine may not be reversed when in
LowLift position.
903075-en-gb; 07.06.2017
12.4
Lift stop
Press on the field in the work display to select the
function.
Green symbol = Lift stop enabled. Lift the bout marker
using the hydraulic connection. Used when the bout
markers are to be retracted without lifting the machine
from the bout, e.g. to pass a post or well. An audio alarm
sounds every five seconds.
White symbol = lift stop disabled.
After 30 seconds, the lift stop will be disabled
automatically.
12.5
Wing folding
Press on the field in the work display to select the
function.
Wing folding opens the wing folding valve from
transportation to field. Applies only to Tempo F
12.6
Auto advance
Press on the field in the work display to select the
function
Green symbol = auto advance disabled. Used to lift the
machine in a bout without advancing the tramlining
cycle and switching bout marker.
White symbol = auto advance enabled. Auto advance is
used during normal driving. The tramlining cycle
advances and the marker switches when the machine is
lifted and lowered.
12.7
Bout marker switching
Press on the field in the work display to select the
function.
Green symbol = automatic bout marker switching.
During normal driving, automatic bout marker switching
is used. The bout marker switches when the machine is
lifted and lowered. Advance bout marking with
.
Use in the field
37
Advertisement
Table of Contents
