Table of Contents
Advertisement
360 Wheels and tyres
Tighten the wheel bolts evenly in a diagonal
#
pattern in the order indicated
an initial maximum force of 80 Nm.
Tighten the wheel bolts evenly in a diagonal
#
pattern in the order indicated
the specified tightening torque of 150 Nm.
& WARNING Risk of accident due to incor‐
rect tightening torque
The wheels could come loose if the wheel
bolts or wheel nuts are not tightened to the
prescribed torque.
Ensure that the wheel bolts or wheel
#
nuts are tightened to the prescribed
tightening torque.
If you are not sure, do not move the
#
vehicle. Contact a qualified specialist
workshop and have the tightening tor‐
que checked immediately.
Check the tyre pressure of the newly fitted
#
wheel and adjust it if necessary.
%
The following does not apply if the new
1
to
5
with
wheel is an emergency spare wheel.
Vehicles with a tyre pressure monitoring
#
system: restart the tyre pressure monitoring
1
to
5
with
system (
page 350).
/
Emergency spare wheel
Notes on the emergency spare wheel
& WARNING Risk of accident caused by
incorrect wheel and tyre dimensions
The wheel or tyre size and the tyre type of
the emergency spare wheel or spare wheel
and the wheel to be replaced may differ. The
emergency spare wheel or spare wheel can
significantly impair driving characteristics of
the vehicle.
To prevent hazardous situations:
Drive carefully.
#
Never fit more than one emergency
#
spare wheel or spare wheel that differs
in size.
Only use an emergency spare wheel or
#
spare wheel briefly.
Do not deactivate ESP
®
.
#
Have the emergency spare wheel or
#
spare wheel of a different size replaced
at the nearest qualified specialist work‐
Advertisement
Table of Contents
