Table of Contents
Advertisement
To lower the vehicle: place the ratchet onto
#
the hexagon nut of the jack so that the letters
"AB" are visible and turn anti-clockwise.
Tighten the wheel bolts evenly in a diagonal
#
pattern in the order indicated
an initial maximum force of 80 Nm.
Tighten the wheel bolts evenly in a diagonal
#
pattern in the order indicated
the specified tightening torque of 150 Nm.
& WARNING Risk of accident due to incor-
rect tightening torque
The wheels could come loose if the wheel
bolts or wheel nuts are not tightened to the
prescribed torque.
Ensure that the wheel bolts or wheel
#
nuts are tightened to the prescribed
tightening torque.
If you are not sure, do not move the vehi-
#
cle. Contact a qualified specialist work-
shop and have the tightening torque
checked immediately.
Check the tyre pressure of the newly fitted
#
1
to
5
with
wheel and adjust it if necessary.
%
The following does not apply if the new wheel
is an emergency spare wheel.
1
to
5
with
Vehicles with a tyre pressure monitoring sys-
#
tem: restart the tyre pressure monitoring sys-
tem (
/
page 548).
F243 0059 02
Wheels and tyres 557
Emergency spare wheel
Notes on the emergency spare wheel
& WARNING Risk of accident caused by
incorrect wheel and tyre dimensions
The wheel or tyre size and the tyre type of the
emergency spare wheel or spare wheel and
the wheel to be replaced may differ. The emer-
gency spare wheel or spare wheel can signifi-
cantly impair driving characteristics of the
vehicle.
To prevent hazardous situations:
Drive carefully.
#
Never fit more than one emergency
#
spare wheel or spare wheel that differs
in size.
Only use an emergency spare wheel or
#
spare wheel briefly.
®
#
Do not deactivate ESP
.
Have the emergency spare wheel or
#
spare wheel of a different size replaced
at the nearest qualified specialist work-
Advertisement
Table of Contents
