Table of Contents
Advertisement
Diagnostics connection
The diagnostics connection is a technical inter‐
face in the vehicle. It is used, for example, within
the scope of repair and maintenance work or for
reading out vehicle data by a specialist work‐
shop. Diagnostic devices should therefore only
be connected by a qualified specialist workshop.
& WARNING Risk of accident due to con‐
necting devices to the diagnostics con‐
nection
If you connect devices to the diagnostics
connection of the vehicle, the function of
vehicle systems and operating safety may be
impaired.
For safety reasons, we recommend that
#
you only use and connect products
approved by your Mercedes-Benz
service centre.
& WARNING Risk of accident due to
objects in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardises the operating and road
safety of the vehicle.
Stow all objects in the vehicle securely
#
so that they cannot get into the driver's
footwell.
Always fit the floor mats securely and
#
as prescribed in order to ensure that
there is always sufficient room for the
pedals.
Do not use loose floor mats and do not
#
place floor mats on top of one another.
* NOTE Battery discharging from using
devices connected to the diagnostics
connection
Using devices at the diagnostics connection
drains the battery.
Check the charge level of the battery.
#
General notes
If the charge level is low, charge the
#
battery, e.g. by driving a considerable
distance.
Please also note the information about the 12 V
battery and short-distance trips in the "Driving
and Parking" chapter (
page 155).
/
29
Advertisement
Table of Contents
