Table of Contents
Advertisement
+
ENVIRONMENTAL NOTE Environmental
pollution caused by environmentally irre‐
sponsible disposal
Tyre sealant contains pollutants.
Have the tyre sealant bottle disposed of
#
professionally, e.g. at a Mercedes-Benz
Service Centre.
Stow the tyre sealant bottle and the tyre
#
inflation compressor.
Pull away immediately.
#
Stop driving after approximately ten minutes
#
and check the tyre pressure using the tyre
inflation compressor.
The tyre pressure must now be at least
130 kPa (1.3 bar/19 psi).
& WARNING Risk of accident due to the
specified tyre pressure not being
attained
If the specified tyre pressure is not reached,
the tyre is too badly damaged. The tyre seal‐
ant cannot repair the tyre in this instance.
The braking and driving characteristics may
be greatly impaired.
Do not continue driving.
#
Consult a qualified specialist workshop.
#
Countries that have Mercedes-Benz
Service24h: you will find a sticker with the tele‐
phone number, e.g. on the B‑pillar on the driver's
side.
Correct the tyre pressure if it is still at least
#
130 kPa (1.3 bar/19 psi). See the tyre pres‐
sure table on the fuel filler flap for values.
To increase the tyre pressure: switch on
#
the tyre inflation compressor.
Breakdown assistance 331
To reduce the tyre pressure: press pres‐
#
sure release button
1
next to manometer
2.
When the tyre pressure is correct, unscrew
#
the filling hose from the valve of the sealed
tyre.
Screw the valve cap onto the valve of the
#
sealed tyre.
Pull the tyre sealant bottle out of the tyre
#
inflation compressor.
The filling hose stays on the tyre sealant bot‐
tle.
Advertisement
Table of Contents
