Table of Contents
Advertisement
114 Seats and stowing
If necessary, reset the driver's or front
#
passenger seat.
Folding back the rear seat backrest
& WARNING Risk of becoming trapped
when adjusting the seats
When you adjust a seat, you may trap your‐
self or a vehicle occupant.
When adjusting a seat, make sure that
#
no one has any body parts in the sweep
of the seat.
* NOTE Damage caused by trapping the
seat belt when folding back the seat
backrest
The seat belt could become trapped and thus
be damaged when the seat backrest is folded
back.
Make sure that the seat belt is not trap‐
#
ped when folding back the seat back‐
rest.
Move the driver's or front passenger seat for‐
#
wards, if necessary.
Fold the corresponding seat backrest
#
back until it engages.
Left and right seat backrests: if the seat
backrest is not engaged and locked in place,
this will be shown on the multifunction dis‐
play on the instrument cluster.
A warning tone will also sound.
Vehicles with a centre seat backrest: if
the seat backrest is not engaged and locked
in place, the red lock verification indicator
2
will be visible.
Locking the release catch of the centre rear
seat backrest
Requirements:
The left and centre seat backrests are
R
engaged and joined together.
You can lock the centre seat backrest release
catch if you want to secure the load compart‐
ment against unauthorised access. The centre
seat backrest can then be folded forwards only
together with the left seat backrest.
1
Advertisement
Table of Contents
