Table of Contents
Advertisement
358 Wheels and tyres
Position support
2
of jack
#
port point 1.
Turn ratchet
3
clockwise until support
#
sits completely on jack support point
the base of the jack lies evenly on the
ground.
Turn ratchet
3
until the tyre is raised a max‐
#
imum of 3 cm from the ground.
Loosen and remove the wheel (
#
Removing a wheel
Requirements:
The vehicle is raised (
R
Vehicles with AMG ceramic high-perform‐
ance composite braking system:
* NOTE Damage to the ceramic-brake disc
when changing a wheel
Mercedes-AMG vehicles with ceramic-
brake discs: during removal and reposition‐
ing of the wheel, the wheel rim can strike the
ceramic-brake disk and damage it.
Take particular care.
#
Ask another person for assistance or
#
4
on jack sup‐
use a second centring pin.
2
When changing a wheel, avoid applying any force
1
and
to the brake discs, as this could impair the level
of comfort when braking.
page 358).
/
* NOTE Damage to threading from dirt on
page 356).
/
#
#
#
#
#
wheel bolts
Do not place wheel bolts in sand or on
a dirty surface.
Unscrew the uppermost wheel bolt com‐
pletely.
Screw centring pin
1
into the thread
instead of the wheel bolt.
Unscrew the remaining wheel bolts com‐
pletely.
Remove the wheel.
Advertisement
Table of Contents
