Table of Contents
Advertisement
Switches on high beam
Turn the light switch to the L or Ã
#
position.
Push the combination switch beyond the
#
point of resistance in the direction of arrow
1.
When the high beam is activated, the indica‐
tor lamp for low beam L will be deactiva‐
ted and replaced by the indicator lamp for
high beam K.
Switching off high beam
Move the combination switch back to its
#
starting position.
Headlamp flashing
Pull the combination switch in the direction
#
of arrow 3.
Turn signal light
To indicate briefly: push the combination
#
switch briefly to the point of resistance in the
direction of arrow
2
or 4.
The corresponding turn signal light will flash
three times.
To indicate permanently: push the combi‐
#
nation switch beyond the point of resistance
in the direction of arrow
2
Activating/deactivating the hazard warning
lights
Press button 1.
#
The hazard warning lights will switch on auto‐
matically if:
or 4.
the airbag has been deployed.
R
the vehicle is heavily braked from a speed of
R
more than 70 km/h to a standstill.
When you pull away again, the hazard warning
light system will switch off automatically at
approximately 10 km/h. You can also switch off
the hazard warning light system using but‐
ton 1.
Adaptive functions, MULTIBEAM LED
Intelligent Light System function
The MULTIBEAM LED headlamps adapt to the
driving and weather situation and provide exten‐
ded functions for improved illumination of the
road.
The system comprises the following functions:
Active headlamps (
R
Cornering light (
R
Motorway mode (
R
Enhanced fog light function (
R
Light and sight 127
page 128)
/
page 128)
/
page 128)
/
page 129)
/
Advertisement
Table of Contents
