Table of Contents
Advertisement
404 Wheels and tires
Tighten the wheel bolts evenly in a diagonal
#
pattern in the order indicated
1
an initial maximum force of 59 lb-ft (80 Nm).
Tighten the wheel bolts evenly in a diagonal
#
pattern in the order indicated
1
the specified tightening torque of 111 lb-ft
(150 Nm).
& WARNING Risk of accident due to incor-
rect tightening torque
The wheels could come loose if the wheel
bolts or wheel nuts are not tightened to the
prescribed torque.
Ensure that the wheel bolts or wheel
#
nuts are tightened to the prescribed
tightening torque.
If you are not sure, do not move the vehi-
#
cle. Contact a qualified specialist work-
shop and have the tightening torque
checked immediately.
Check the tire pressure of the newly installed
#
wheel and adjust it if necessary.
%
The following does not apply if the new wheel
to
5
with
is an emergency spare wheel.
Vehicles with a tire pressure loss warning sys-
#
tem: restart the tire pressure loss warning sys-
to
5
with
tem (
page 382).
/
Vehicles with a tire pressure monitoring sys-
#
tem: restart the tire pressure monitoring sys-
tem (
page 381).
/
Emergency spare wheel
Notes on the emergency spare wheel
& WARNING Risk of accident caused by
incorrect wheel and tire dimensions
The wheel or tire sizes and the tire type of the
emergency spare wheel or spare wheel and
the wheel to be replaced may differ. The emer-
gency spare wheel or spare wheel can signifi-
cantly impair driving characteristics of the
vehicle.
To prevent hazardous situations:
Drive carefully.
#
Never install more than one emergency
#
spare wheel or spare wheel that differs
in size.
Only use an emergency spare wheel or
#
spare wheel briefly.
®
Do not deactivate ESP
.
#
Have the emergency spare wheel or
#
spare wheel of a different size replaced
at the nearest qualified specialist work-
Advertisement
Table of Contents
