Mercedes-Benz AMG GT 4-door coupe Owner's Manual page 234

Hide thumbs Also See for AMG GT 4-door coupe:
Table of Contents

Advertisement

System limits
If the system is not ready for operation, the
tem inoperative
message appears in the media
display.
The 360° Camera will not function or will only
partially function in the following situations:
You are driving forwards at a speed greater
R
than approximately 16 km/h.
The doors are open.
R
An outside mirror is not completely folded
R
out.
The boot lid is open.
R
The weather conditions are poor, e.g. heavy
R
rain, snow, fog, storm or spray.
The light conditions are poor, e.g. at night.
R
The camera lens is obstructed, dirty or mis‐
R
ted up.
If cameras or vehicle components in which
R
the cameras are fitted are damaged. In this
event, have the cameras, their positions and
their setting checked at a qualified specialist
workshop.
Sys-
%
Do not use the 360° Camera under such cir‐
cumstances. You could otherwise injure oth‐
ers or collide with objects when parking the
vehicle.
For technical reasons, the standard height of the
vehicle may be altered if the vehicle is carrying a
heavy load and can result in inaccuracies in the
guide lines and in the display of the generated
images.
The field of vision and other functions of the
camera system may be restricted due to addi‐
tional attachments on the vehicle (e.g. licence
plate bracket, bicycle rack).
Driving and parking 231
%
The contrast of the display may be impaired
by abrupt, direct sunlight or by other light
sources, e.g. when driving out of a garage. In
this case, pay particular attention.
%
Have the display repaired or replaced if, for
example, pixel errors considerably restrict its
use.
See the notes on cleaning the 360° Camera
(
page 320).
/
Calling up the view of the 360° Camera
using reverse gear
Requirements:
The
Auto reversing camera
R
ted in the multimedia system (
Engage reverse gear.
#
Select the desired view in the multimedia
#
system (
page 228).
/
If, after shifting to reverse gear, the image of
#
the reversing camera is not shown: switch off
the ignition, press and hold the c button,
switch on the ignition and engage reverse
gear again.
function is activa‐
page 232).
/

Advertisement

Table of Contents
loading

Table of Contents