Example 6: Saving A Preset - Extron electronics MTPX Plus Series User Manual

Example 6: Saving a preset

In the following example, the current configuration is saved as a preset. The steps
show the front panel indications that result from your action.
1. Press and release the Esc button (figure 3-37).
Press the Esc button to clear all selections.
C O N T R O L
VIEW
ENTER PRESET
The button flashes once.
Figure 3-37 — Clear all selections
2. Press and hold the Preset button for approximately 2 seconds until it blinks
(figure 3-38).
Press and hold the Preset button until it blinks.
PRESET PRESET
2 seconds
All input buttons with assigned
presets light red.
If you then save the configuration
to a lit preset number, the
configuration data at that preset
location will be overwritten.
Figure 3-38 — Enter Save Preset mode
3. Press and release the input or output button for the desired preset
(figure 3-39).
Press and release the Input 1 button.
•
The button blinks red to indicate that this preset
number is selected but not saved.
1 2 3
17 18 19 20 21 22 23 24 31 32
Figure 3-39 — Select the preset
MTPX Plus Twisted Pair Matrix Switchers • Operation
ESC
4 5 6 7 8 15 16
Red
(Preset Assigned)
1 2 3 4 15 16
17 18 19 20 31 32
Unlit
(No Preset Assigned)
C O N T R O L
VIEW
ENTER PRESET
•
The Enter button blinks to
indicate the need to save
I
the preset.
N
•
The Preset button
P
continues to blink.
U
T
S
I
N
P
U
T
S
ESC
3-29