Selecting Lock Mode 2 Or Toggling Between Mode 2 And Mode 0; Selecting Lock Mode 2 Or Toggling Between Mode 2 And Mode 1 - Extron electronics MTPX Plus Series User Manual

Selecting Lock mode 2 or toggling between mode 2 and mode 0

N If the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2.
If the switcher is in Lock mode 2, this procedure selects mode 0 (unlocks the
switcher).
Toggle the lock on and off by pressing and holding the Enter button, the Video
button, and the Audio button simultaneously for approximately 2 seconds
(figure 3-65).
Press and hold the Enter, Video, and Audio
buttons simultaneously to turn on Lock mode 2
or to toggle between mode 2 and mode 0.
I / O
ENTER VIDEO AUDIO
Figure 3-65 — Toggle front panel lock between mode 2 and mode 0

Selecting Lock mode 2 or toggling between mode 2 and mode 1

N If the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2.
If the switcher is in Lock mode 2, this procedure selects mode 1.
Toggle the lock on and off by pressing and holding the Video button and the Audio
button simultaneously for approximately 2 seconds (figure 3-66).
Press and hold the Video and Audio buttons
simultaneously to turn on Lock mode 2 or to
toggle between mode 1 and mode 2.
I / O
2 seconds
VIDEO AUDIO
Figure 3-66 — Toggle front panel lock between mode 2 and mode 1
MTPX Plus Twisted Pair Matrix Switchers • Operation
I / O
2 seconds
ENTER VIDEO
The Video and Audio
I / O
buttons blink twice to
indicate the mode
VIDEO AUDIO
change.
Release the buttons.
The Enter, Video,
and Audio buttons
blink twice to indicate
AUDIO
the mode change.
Release the buttons.
3-47