Table of Contents
Advertisement
Output impedance ........................ 110 ohms
Max. input voltage ........................ 5.0 Vp-p
Max. propagation delay ............... 60 ns total
Max. rise/fall time ........................ 4 ns
Polarity............................................ Positive or negative
Audio
Routing
MTPX Plus 816................... 8 x 16 mono matrix, 3 x 4 local
MTPX Plus 168................... 16 x 8 mono matrix, 3 x 4 local
MTPX Plus 1616................. 16 x 16 mono matrix, 3 x 4 local
MTPX Plus 1632................. 16 x 32 mono matrix, 6 x 8 local
MTPX Plus 3216................. 32 x 16 mono matrix, 6 x 8 local
MTPX Plus 3232................. 32 x 32 mono matrix, 6 x 8 local
Gain (local inputs and outputs) .. Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response ...................... 20 Hz to 20 kHz, ±1 dB
THD + Noise .................................. 0.15% @ 1 kHz at nominal level
S/N .................................................. >70 dB at maximum output (unweighted)
CMRR .............................................. >43 dB @ 20 Hz to 20 kHz
Audio input— local
Number/signal type ..................... 3 or 6 stereo, balanced/unbalanced
Connectors ..................................... (3) or (6) 3.5 mm captive screw connectors, 5 pole
Impedance ...................................... >10k ohms unbalanced
Nominal level ................................ +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level .............................. +18 dBu, (unbalanced) at 1% THD+N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
N
Audio input — main(see transmitters' output specifications)
Number/signal type ..................... 8, 16, or 32 proprietary analog signals
Connectors ..................................... 8, 16, or 32 (depending on configuration) female RJ-45 connectors
Audio output— local
Number/signal type ..................... 4 or 8 dual mono, balanced/unbalanced
Connectors ..................................... (4) or (8) 3.5 mm captive screw connectors, 5 pole
Impedance ...................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ....................................... ±1 dB channel to channel
Maximum level (Hi-Z) ................. +18 dBu, balanced or unbalanced at 1% THD+N
Maximum level (600 ohm) ........... +15 dBm, balanced or unbalanced at 1% THD+N
Audio output — main(see receivers' input specifications)
Number/signal type ..................... 8, 16, or 32 proprietary analog signals
Connectors ..................................... 8, 16, or 32 (depending on configuration) female RJ-45 connectors
Control/remote — switcher host control
Serial host control ports ............... 1 RS-232 or RS-422, rear panel 9-pin female D connector
Baud rate and protocol ................. 9600 baud (default), 19200, 38400, and 115200 (adjustable); 8 data bits; 1 stop
MTPX Plus Twisted Pair Matrix Switchers • Reference Information
1 RS-232 front panel 2.5 mm mini stereo jack
bit; no parity
B-3
Advertisement
Table of Contents
