Table of Contents
Advertisement
Matrix Software, cont'd
Preferences menu
Immediate Changes — Causes configuration changes to take
Hold/Verify Changes — Delays implementation of
Ties as Lines — Displays ties as lines (figure 5-18).
Figure 5-18 — Ties shown as lines
Ties as Crosspoints — Displays ties as a matrix of inputs and outputs (figure 5-19).
Figure 5-19 — Ties shown as crosspoints
Limit ties to same group — Allows you to limit the creation of ties using the
Icons in I/O boxes — Erases any numbers in the I/O boxes in the
Numbers in I/O boxes — Erases any icons in the I/O boxes in the
5-22
MTPX Plus Twisted Pair Matrix Switchers • Matrix Software
effect immediately.
configuration changes until the Changes – Take button
is pressed.
Ties that have been made are indicated as amber (video and audio), green
(video only), and red (audio only) boxes. Ties that will take effect when you
click the Take button are indicated by +. Ties that will be broken when you
click the Take button are indicated by –.
program to inputs and outputs that are in the same group (similar to front
panel operation).
Control Program window (figure 5-6). You can place icons in the
boxes.
Control Program window and fills each box with the associated
input or output number.
Advertisement
Table of Contents
