Performing Soft System Resets (Resets 3, 4, And 5) - Extron electronics MTPX Plus Series User Manual

Operation, cont'd

Performing soft system resets (resets 3, 4, and 5)

Perform a soft reset of the switcher as follows:
1.
Figure 3-76 — Soft system resets
2.
3-54 MTPX Plus Twisted Pair Matrix Switchers • Operation
Use an Extron Tweeker or other small screwdriver to press and hold the rear
panel Reset button until the front panel Video and Audio buttons blink the
number of times for the desired reset: once (events reset), twice (system reset),
or three times (absolute reset) (figure 3-76).
Press and hold
Reset LED flashes once.
the Reset button.
3 seconds
Events Reset
(Mode 1)
Front panel I/O buttons flash once.
Press and hold
the Reset button.
6 seconds
IP Settings
Reset
(Mode 4)
Front panel I/O buttons flash twice.
Press and hold
the Reset button.
9 seconds
Absolute Reset
(Mode 5)
Front panel I/O buttons flash three times.
Release the Reset button and then immediately press and release the Reset
button again. Nothing happens if the second momentary press does not occur
within 1 second.
Release, then immediately
press and release again.
I / O
VIDEO AUDIO
Release, then immediately
Reset LED flashes twice.
press and release again.
I / O
VIDEO AUDIO
Reset LED flashes
Release, then immediately
three times.
press and release again.
I / O
VIDEO AUDIO