f
Esc (
>
) button — The Esc (
secondary functions (❏):
•
Cancels operations or selections in progress and resets the front panel
button indicators.
N The Esc (
>
) button does not reset the current configuration, the Video button
and Audio selection button, any presets, or any audio gain or attenuation or
volume settings.
•
Flashes once to indicate that the escape function has been activated.
In the I/O Group mode, selects group 4 and indicates the selection. See
❏
"I/O grouping" on page 3-23.
Increases the audio level of the selected input. See "Viewing and
❏
adjusting the TP input audio level" on page 3-34.
Increases the volume of the selected output. See "Viewing and adjusting
❏
the local output volume" on page 3-40.
With the Enter, Preset, and View buttons, selects Serial Port and Audio/
❏
RS-232 Input Configuration mode. See "Selecting the rear panel Remote
port protocol and baud rate" on page 3-50 and "Defining the audio/
RS-232 wire pair" on page 3-49.
Selects 115200 baud for the rear panel RS-232/RS-422 port in Serial Port
❏
and Audio/RS-232 Input Configuration mode and indicates the selection.
See "Selecting the rear panel Remote port protocol and baud rate" on
page 3-50.
MTPX Plus Twisted Pair Matrix Switchers • Operation
>
) button has two primary functions (•) and five
3-7