Extron electronics Multi-Graphic Processor MGP 464 HD-SDI User Manual page 66

Command/response table for SIS commands (continued)
Command
Vertical size (image)
Specific value
Increase vertical size of image
Decrease vertical size of image
View vertical size of image
Picture control copy
Copy picture controls
Window size and position
Set window size and position
The variables must be entered in the following order: Horizontal position, vertical position, horizontal size, vertical size.
N
View size and position
PRELIMINARY
ASCII (Telnet) Response
(host to processor) (processor to host)
X50@ X52# X50@
2 * * ;
X50@ X50@
2 * + ;
X50@ X50@
2 * – ;
X50@ X52# ]
2 * ;
X50@
21 * # Pcc
E X50@ X52! X52! X52@ X52@
, * * * X Y
Wxy
E X50@ } X50@
X Y
Additional description
X52# ]
Ivs Set the height of the image in window
X52#
.
X50@
= 0 through 4; 0 = all windows.
X52#
For
Minimum = 1/16 the size of the active input area.
Maximum = double the active output area for 200%
zoom.
X52# ]
Ivs Increase the height of the image in window
X52# ]
Ivs Decrease the height of the image in window
View the height of the image in window
X50) ]
Copy the picture controls for currently displayed
X50)
input
X50)
= 1 through 19.
}
X50@ X52! X52! X52@ X52@ ]
, * * *
Set the position and size of window
X52@
and
X52!
For
0 = 2048; limits are ± the output resolution.
X52@
For
Minimum = 1/16 the size of the active output area.
Maximum = size of the active output area..
X52! X52! X52@ X52@ ]
, * * *
View the position and size of window
X50@
to
:
X50@
.
X50@
.
X50@
.
X50@
to window .
X50@ X52!
to
, respectively.
:
:
X50@
.