Resolution And Refresh Rate Submenu; Output Type Submenu - Extron electronics Multi-Graphic Processor MGP 464 HD-SDI User Manual

Operation, cont'd

Resolution and Refresh Rate submenu

While this submenu is displayed, rotate the horizontal Adjust (
one of the available resolutions, or rotate the vertical Adjust ({) knob to select one
of the available refresh rates. The resolutions and refresh rates are listed in the
following table.
Resolution
640 x 480
800 x 600
852 x 480
1024 x 768
1024 x 852
1024 x 1024
1280 x 768
1280 x 1024
1360 x 765
1365 x 768
1366 x 768
1365 x 1024
1400 x 1050
1600 x 1200
480p
576p
720p
1080i
1080p
DVI BCKGD* RATE Resolution and clock of the incoming background input
*

Output Type submenu

Rotate either the horizontal Adjust (
the output signal type required by the display device. Available signal types are
RGBHV, RGBS, YUV bi-level and YUV tri-level. The default is RGBHV.
3-12 MGP 464 • Operation
50 Hz
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
When DVI BCKGD is selected as the output resolution/rate, the MGP uses
the incoming DVI background input resolution and clock as the output rate.
The sync type and polarity options are available for the RGB output while the
background timings are used. If available, the output of the MGP is locked to
the DVI background rate until you select a different resolution or disconnect
the DVI background input.
By default, the resolution provided in the Extended Display Identification
Data (EDID) is the last selected factory rate. To manually set the resolution
information provided in the EDID data, see the Set EDID information SIS
command on page 4-9.
Refresh Rates
60 Hz 72 Hz 96 Hz
X X X
X X X
X X X
X X X
X X X
X X
X
X
X
X
X
X
X
X
X
X
X
X
) or the vertical Adjust ({) knob to select
[
[ ) knob to select
100 Hz 120 Hz
X X
X X
X