Leica BLK2FLY User Manual page 28

Operation mode
28
BLK2FLY – battery powered
State/action
The BLK2FLY is off.
Booting up.
Pairing mode. Waiting
for connection.
Pairing mode. Pairing
successful.
Idle. On ground. The
BLK2FLY is ready.
Idle. The BLK2FLY is not
ready to take-off. Pos-
sible reasons: Can be
high tilt or wings not
being unfolded com-
pletely.
Prepare for take-off.
While pressing take-off
button.
Take-off abort.
Free flight.
Recording data. Inde-
pendent on flight mode.
Automated flight/scan
mission.
Automated landing.
Final, vertical part.
LiDAR light guide
None.
Fade in to 100% bright-
ness, then 0.5 Hz
pulsating 100% / 10%
brightness during boot
up → Yellow
Alternate between 2 Hz
blinking and 1 s pause
100% / 0% brightness →
Blue
2 Hz blinking for 2 s
100% / 0% brightness →
Green
Static, 100% brightness
→ Green
Static, 100% brightness
→ Yellow
2 Hz blinking 100% / 0%
brightness → Yellow
Static, 100% brightness
→ Green
Static, 100% brightness
→ Green
0.5 Hz pulsating 100% /
10% brightness →
Green
N/A – idle pattern if not
recording data.
2 Hz blinking 100% / 0%
brightness → Yellow
Description of the BLK2FLY
Wing light guides
None.
0.5 Hz pulsating 40% /
10% brightness during
boot up.
Static, 40% brightness.
Static, 40% brightness.
Static, 40% brightness.
Static, 40% brightness.
Fade from current
brightness to 100%
brightness (+40%/s).
Fade from current
brightness to 40%
brightness (−40%/s).
Static, 100% bright-
ness.
Just displays the current
active flight mode.
If recording data dur-
ing manual flying is act-
ive, it displays the free
flight pattern. If record-
ing during an auto-
mated scan mission is
active, it shows the
scan mission wing LED
pattern.
2 Hz pulsating reciproc-
ally with both sectors
100% / 40% brightness.
2 Hz blinking 100% / 0%
brightness.