Table of Contents
Advertisement
10.6
100
Post-flight Procedures
Recommended post-flight procedure
Visual inspecton of the BLK2FLY
•
In case the unit got damp, ensure to take it out of the transportation case
•
as soon as possible to dry
Charge batteries again
•
Connect the BLK2FLY to a computing device using WLAN or the USB‑C type
•
cable
Upload data to HxDR in the BLK2FLY Live app under Settings > Profile
•
Connect BLK2FLY to USB-C Cable for data download
1.
Remove the Smart Battery GEB374 to get access to the USB‑C port.
2.
Connect the included USB‑C
cable to the BLK2FLY.
3.
Connect the BLK2FLY to the computer.
The BLK2FLY boots up automatically. It is then visible for:
☞
Leica Cyclone REGISTER 360
•
Leica Cyclone REGISTER 360 (BLK Edition)
•
Leica Cyclone BLK Data Manager
•
In case an issue needs to be reported to Leica support, go to the Support
menu to upload logs. Refer to
Post processing software
Leica Cyclone REGISTER 360
•
Leica Cyclone REGISTER 360 (BLK Edition)
•
HxDR
•
Leica Cyclone BLK Data Manager
•
7.6.8 Support Screen
for details.
Operation
Advertisement
Table of Contents
