Leica BLK360 Release Notes

Leica BLK360 Release Notes

Imaging laser scanner
Hide thumbs Also See for BLK360:

Advertisement

Quick Links

Leica Geosystems
Release Notes
Product
Leica BLK360 Imaging Laser Scanner
Date
1st July 2021
From
Björn Beutelspacher
Leica BLK360 Imaging Laser Scanner – Firmware v2.1.0
Leica Geosystems AG
Heinrich-Wild-Strasse
CH-9435 Heerbrugg
Schweiz
www.leica-geosystems.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BLK360 and is the answer not in the manual?

Questions and answers

Summary of Contents for Leica BLK360

  • Page 1 Leica Geosystems Release Notes Product Leica BLK360 Imaging Laser Scanner Date 1st July 2021 From Björn Beutelspacher Leica BLK360 Imaging Laser Scanner – Firmware v2.1.0 Leica Geosystems AG Heinrich-Wild-Strasse CH-9435 Heerbrugg Schweiz www.leica-geosystems.com...
  • Page 2 Please note that Leica Cyclone FIELD 360 versions before v2.4 can show data download issues when used with BLK360 firmware v2.0.0. It is strongly recommended to update Leica Cyclone FIELD 360 to the latest version v3.1.0 when being connected to BLK360 firmware v2.0.1!
  • Page 3 In cases like this or when a faster datatransfer is required, now the BLK360 can easily be connected to a computing device. This is a feature that was requested by the market and we are happy to present it now for the Leica BLK360.
  • Page 4 BLK360, the LED will go into red error state, indicating that this setup is currently not supported. When the Leica BLK360 is in red error state, it is as well not possible to connect to it using the Leica Cyclone Field360 app.
  • Page 5 The 2nd option is to connect the BLK360 to a network, e.g. a router. This option requires a given network structure. Furthermore the used router with BLK360 must be in the same subnetwork as the computing device to ensure Leica Cyclone Data Manager or Leica Cyclone Register 360 can connect to the device.
  • Page 6 Other communication for BLK360 to PC, for example via a USB-C to USB-C cable, is not supported. Also charging the Leica BLK360 battery inside the device via the USB-C plug is not supported and can damage the Leica BLK360.
  • Page 7 In rare cases the sensor shuts down unexpectedly this will be indicated by a warning state (orange LED ring) at the next start of the device. A press on the power button will reset the warning state and the Leica BLK360 will again be fully operational.
  • Page 8 Cyclone Field 360 will show an error message when trying to start a scan although the Leica BLK360 is in warning state. A restart of the sensor as stated in the error message is not required. As written above, a simple press on the power button solves the issue and the scan can be started.

Table of Contents