Leica BLK2FLY User Manual page 29

Description of the BLK2FLY
State/action
Hot-swap the Smart
Battery GEB374.
Error, critical prob-
lem or major fail-
ure. Contact a Leica
Geosystems authorised
Service Centre for fur-
ther investigation.
Mag calibration
State/action
Keep rotating.
Next step/wrong direc-
tion.
Rotating too fast.
Finished calibration.
BLK2FLY – USB-C powered
State/action
USB Type-C connector
cable plugged in, boot-
ing up.
Idle.
File sync in progress.
Power not sufficient.
For example: USB 2.0
LiDAR light guide
1 Hz pulsating 100% /
20% brightness
Colour depending on
time passed since
removing battery
0–3 s → Green
3–6 s → Yellow
> 6 s → Red
1 Hz blinking 100% / 0%
brightness → Red
LiDAR light guide
0.5 Hz pulsating 100% /
10% brightness →
Green
2 Hz blinking 100% / 0%
brightness → Yellow
0.5 Hz pulsating 100% /
10% brightness →
Yellow
2 Hz blinking for 10 s
100% / 0% brightness →
Green
LiDAR light guide
Fade in to 100% bright-
ness, then 0.5 Hz
pulsating 100% / 10%
brightness during boot
up → Yellow
Static, 100% brightness
→ Green
0.3 Hz pulsating 100% /
10% brightness →
Yellow
1 Hz blinking 100% / 0%
brightness → Red
Wing light guides
Turned off.
1 Hz blinking 20% / 5%
brightness.
Wing light guides
0.5 Hz pulsating.
2 Hz blinking.
0.5 Hz pulsating.
2 Hz blinking for 10 s.
Wing light guides
Turned off.
Turned off.
Turned off.
Turned off.
29