Description of the Application, Mission Planning
5.
Tap on the surface to set
corners to create an area for
recording.
Edit the area by tap/shift of
•
the dots
Delete single dots. Use the
•
small bin icon
dot
Delete the whole area. Use
•
the large bin icon bottom/
centre
6.
Once defined, accept the area.
The flying pattern for the surface
☞
recording is displayed.
The BLK2FLY is ready to start the
mission.
7.
Option: Tap one of these but-
tons to open the area editor
again.
8.
Option: Tap to add an area to
the already defined area.
9.
Option: Tap
definition
10.
Tap to start the surface record-
ing.
The BLK2FLY starts surface
☞
recording.
Example: Map View
near the
23907_002_en
A
to cancel the area
A
81