13
13.1
Product
Smart Battery GEB374
13.2
General
13.2.1
General cleaning
information
Dust and debris on
the dome
Cleaning of the
camera lenses
106
Care and Transport
Storage
Respect the temperature limits when storing the equipment, particularly in
summer if the equipment is inside a vehicle. Refer to
information about temperature limits.
The battery type is LiPo (Lithium-Ion-Polymer).
Refer to the enclosed Leica GKL352 Quick Guide or documentation on
myworld.leica-geosystems.com
Charge/discharge the battery
•
Obtain information about battery charge status
•
Check the Smart Battery GEB374 for inflation or damage. You must
☞
never use problematic batteries.
Charge the Smart Battery GEB374 at least once every 3 months to
☞
60% for optimal storage and lifetime.
It is recommended to store the battery at around +20 to +25 °C.
☞
Always remove the Smart Battery GEB374 from the BLK2FLY if not
☞
operated in order to prevent battery damage.
Cleaning and Drying
Only use a damp microfibre cloth to clean the BLK2FLY. Do not use detergent
on carbon fibre parts. Use a brush to remove loose dust.
NOTICE
Prevent scratching the LiDAR lighthouse
▶
Remove particles very careful. Do not scratch the LiDAR lighthouse.
Dome Cleaning Procedure
The dome must be kept clean. The instructions must be followed as described
in this chapter to clean the dome.
CAUTION
Before any cleaning procedure, ensure that the instrument is switched off and
the battery has been removed.
Using a compressed gas duster or canned air, remove dust and debris from
surface of the dome.
Never rub off dust or debris as this will scratch the glass and so
☞
possibly cause permanent damage to the special optical coatings.
Soiling of the glass pane can cause extreme measurement errors and there-
fore useless data!
All soiling that is visible on the glass pane has to be removed, except
☞
for single small dust particles that adhere inevitably.
14 Technical Data
for details.
Care and Transport
for
https://