Table of Contents
Advertisement
2.7
Description
16
CAUTION
Wet equipment
Operating wet equipment leads to damage or malfunction of the instrument.
Precautions:
▶
Do not power on the BLK2FLY system during cleaning and drying process.
▶
Do not connect power cables to the power source.
▶
If the equipment becomes wet, leave it unpacked.
▶
Move it to an environment with low humidity.
▶
Dry wet components, the container, the foam inserts and the accessories
at a temperature not greater than +40 °C/+104 °F and clean them thor-
oughly.
▶
Do not repack until everything is dry.
NOTICE
Electric shock from electrostatic discharge
Risk from lightning exists while working during thunderstorm conditions. The
aircraft may get electrostatic charged during flight. As a result electrostatic
discharge may occure when touching the aircraft on ground.
Precautions:
▶
Never fly during thunderstorm conditions.
▶
Land aircraft as soon as possible if sudden thunderstorm conditions
appear.
NOTICE
Misted optics
Due to sudden temperature differences it may happen that humidity is built up
on the optics. This results in misted view.
Precautions:
▶
Make sure there was sufficient time for the equipment to reach ambient
temperature before the mission starts.
▶
Perform visual inspection of optics before the flight.
Electromagnetic Compatibility (EMC)
The term Electromagnetic Compatibility is taken to mean the capability of
the product to function smoothly in an environment where electromagnetic
radiation and electrostatic discharges are present, and without causing elec-
tromagnetic disturbances to other equipment.
WARNING
Electromagnetic radiation
Electromagnetic radiation can cause disturbances in other equipment.
Precautions:
▶
Although the product meets the strict regulations and standards which
are in force in this respect, Leica Geosystems cannot completely exclude
the possibility that other equipment may be disturbed.
Safety Directions
Advertisement
Table of Contents
