Delete Presets - ETC QuickTouch Preset Handheld User Manual

Table of Contents

ETC User Guide

QuickTouch Preset Handheld

Delete Presets

To delete a preset:

Select the preset you wish to delete from the preset display in the properties area of the preset

screen.

Press "Delete." A confirmation dialog will open.

CAUTION:

Press "Cancel" to abort the deletion. Press "Yes" to delete the preset.

Set Presets as Simple

Simple presets are those that can be run by the Panel Users and Panel Preset Operators. If you want

a preset to be available from the Presets screens for those users, the preset must be designated as a

Simple preset by the Power User. You can make a preset a Simple preset by performing the

following steps:

Select the preset that you want to make a Simple preset.

Press the Options button to open the Preset Options dialog.

Select the Simple Preset check box and then press Ok.

Notice that your preset now has an "S" in the upper right corner of the

preset button, designating it as a Simple preset.

QuickTouch Preset Handheld

You are about to delete preset content that cannot be recovered.

Page 11 of 15

ETC

Table of Contents

Do you have a question about the QuickTouch Preset Handheld and is the answer not in the manual?

Quicktouch preset