Delete Presets - ETC QuickTouch Preset User Manual

ETC User Guide
QuickTouch Preset

Delete Presets

1. Select the preset you wish to delete from the Presets screen.
2. Press Delete.
CAUTION:
3. From the Delete Preset dialog that appears, press Yes.
Set as Panel Preset
Panel presets are those that can be run by the Panel Users and Panel Preset Operators. If you want
a preset to be available from the Presets screens for those users, the preset must be designated as
such by a Power User. You can make a panel preset by performing the following steps:
1. Select the preset that you want to make a panel preset.
2. Press the Options button to open the Preset Options dialog.
3. Select the Show this preset on the panel presets page check box and then press Ok.
Once you have set a preset as a panel preset, a four-square icon appears in the lower left corner of
the preset.
QuickTouch Preset
You are about to delete preset content that cannot be recovered.
Page 11 of 15 ETC