Advertisement
Wing Float Assembly.
77. Glue together parts E3/E4
and E8 as shown above.
79. Add the top to the floats
using part E2.
82. Glue the float struts E1 to the
floats. When dry, mark a line 80mm
from the top of the float onto the
strut.
78. Add to this sub assembly the 2 sides of the
floats parts E6.
80. Form the underneath of the floats
using part E7. Due to the curve these
will require pinning in place as the glue
dries.
83. Glue the struts to the servo
mounts exactly on the 80mm mark
so that they are both identical
Page 18
81. Cap the backend of the
floats using part E5.
84. Screw the servo mount/
float assembly to the wing.
Advertisement
