Table of Contents
Advertisement
61200226L1-1
Instructions for Updating Firmware Using XMODEM (Continued)
Step
From the terminal emulation software, begin the XMODEM upload
by using the appropriate command sequence. (If necessary, refer
to terminal emulation software documentation for help. Also, when
specifying the filename, ensure that the file transferred is the one
provided by ADTRAN. Otherwise, the update will not complete
successfully.)
8
Because XMODEM data is being transferred in-band through
the menu interface, the VT-100 menus of ATLAS will be
inoperable from the Chain-In port. You can cancel the update
at any point in time within the terminal emulation software.
(Please consult the documentation provided by the terminal
emulation software to determine how to do this.)
To update additional modules, begin at step 3 and repeat this
9
process.
When the update process has successfully completed,
Current Update Status field and
Previous Update Status field. Either the module restarts immediately and
resumes operation, or it restarts at the specified time and day of the week—
depending on your selection.
If an error occurred during the update process, Previous Update Status
displays an appropriate error message.
PLUS
ATLAS 800
Chapter 11. Updating Firmware
Action
Module Update Complete
Figure 11-1. Update Firmware Menu Interface
User Manual
displays in the
Idle
displays in the
11-3
Advertisement
Table of Contents
