Table of Contents
Advertisement
Chapter 13. ADTRAN Utilities
13-14
Also, a level 3 or better password is required for performing a configuration
upload. Please consult the ATLAS administrator if level 3 access is not avail-
able.
Instructions for Retrieving a Configuration from TFTP Server
Step
Use Telnet to
log in
1
upload a configuration file.
2
Select the System Utility menu, then the Config Transfer menu.
Set the TFTP Server IP Address to the IP address of the machine
3
running the TFTP server program. (If you are using the ADTRAN
TFTP server, the IP address displays in the Status field.)
Change the TFTP Server filename to the filename of a previously
4
saved configuration you wish to load. (Enter the complete
directory path to the file.)
Move to the Load And Use Config button and press Enter to
proceed with the transfer. Respond with Y to confirm the transfer
request.
5
The ATLAS 800
configuration successfully loads. No additional
confirmation is requested, and any online sessions are
terminated.
The Current Transfer Status field indicates the transfer progress. If the up-
load succeeds, the unit automatically reboots and runs using the new config-
uration. If the upload fails, an error message displays in the Previous
Transfer Status field. If the TFTP server cannot be contacted, the transfer at-
tempt times out in approximately 20 seconds.
PLUS
ATLAS 800
Action
PLUS
to the ATLAS 800
PLUS
reboots immediately after a
User Manual
to which you want to
61200226L1-1
Advertisement
Table of Contents
