ADTRAN ATLAS 800 PLUS User Manual page 135

61200226L1-1
Instructions for Configuring the Ports for Example 3
Step
Prior to setting up the Dial Plan, you must configure the
1
Controller T1/PRI interfaces.
This configuration action only brings up the T1 transport; set the
2 BRI configuration (SPID and phone number) as part of the Dial
Plan.
Instructions for Setting Up Dial Plan for Example 3
Step
Determine the network and the attached equipment (video
1
equipment and PBX) provisioning (see Table 10-1).
From Dial Plan , select Global Parameter , and enter the local area
2
code (needed for Caller ID operation).
Determine which ports are network terminations and which are
3
user terminations.
Define the phone number acceptance and rejection criteria for
4
each termination.
This example includes one PRI port terminating the network
(PRI-A) and three BRIs (BRI A, B, and C)—see Table 10-2.
User terminations include one PRI, one RBS T1, and three BRIs
(see Table 10-3).
PLUS
ATLAS 800
Chapter 10. Dial Plan Terminal Menu
Action
Action
User Manual 10-23