Table of Contents
Advertisement
» Status
» Rev
Modules (Quad T1/PRI) Menu
»» Controller Info
»» Alarm Status
61200226L1-1
Read security:5
Displays status information on the ATLAS 800
installed modules as follows:
Online
The module is enabled and is responding to the system
controller's status polls. This is the normal response of the
system.
No Response
The module is enabled but is not responding to the sys-
tem controller's status polls. This response indicates a
problem in the system or that the module is not installed.
Empty
The system controller has not detected the presence of a
module in the system, nor has a module been manually
enabled for this option slot.
Offline
The modules is installed but has been taken Offline by a
user. The module is still responding to controller polls.
Offline/No
The module is installed but has been taken Offline by a
Response:
user. The module is not responding to polls.
Not Supported The module is not supported by the current system con-
figuration.
Read security:5
Displays the hardware revision of the ATLAS 800
This section provides detailed information on the Modules / Menu sub-
menus. Menu provides access to commands that allow you to review the sta-
tus of various options, change the configuration for general parameters, and
initiate tests. This section only describes the menu options for the Quad T1/
PRI controller port (the ATLAS 800
tions for individual modules, refer to the appropriate module manuals.
Read security:5
Displays general information about the ATLAS 800
Quad T1/PRI ports as follows:
Part Num
Displays the part number of the ATLAS 800
PLL Status
Indicates whether the clock is locked to its specific
(Phase Lock Loop)
source.
Read security:5
Displays any active alarms as follows:
PLUS
ATLAS 800
Chapter 7. Modules Terminal Menu
PLUS
PLUS
PLUS
Base Unit). For details on menu op-
User Manual
T1/PRI ports and other
.
PLUS
Base Unit and
PLUS
.
7-3
Advertisement
Table of Contents
