ADTRAN ATLAS 800 PLUS User Manual page 161

» Disconnect
» File Transfer
»» XMODEM CRC
»» ASCII Cfg Files
EDIT MENU
>
PORT MENU
>
OPTIONS
>
MENU
» Refresh Screen
» Connect
»» Transmit Wakeup
»» Transmit Refresh
» Colors
» Local Echo
» AutoRepeat
CAPTURE
>
MENU
61200226L1-1
Closes a specified serial port at the end of a VT-100 session.
Uploads and downloads files to and from an ATLAS.
Selects the XMODEM file transfer protocol.
Selects ASCII transfer mode. Primarily useful for configuration transfers for
the Express products.
Identical to the Telnet Edit Menu (see Edit Menu on page 13-7).
Changes serial COM port Settings . Provides data
rate settings from 300—57600 bps.
Provides terminal screen commands.
Redraws the screen.
Provides the options Transmit Wakeup and Transmit Refresh .
Provides a control sequence that puts the ATLAS Control Port online in ter-
minal mode.
Provides a control sequence to automatically refresh the screen when con-
necting. (This is the default setting for the ATLAS.)
Identical to Telnet Colors Menu (see Colors on page 13-7).
Echoes each character that you enter.
Repeats characters you select from the keyboard if you hold down the key.
Identical to the Telnet Capture Menu (see Capture Menu on page 13-7).
PLUS
ATLAS 800
Chapter 13. ADTRAN Utilities
User Manual 13-9