SERVER
>
MENU
» Enable
» Disable
» Abort
» Exit
PRINT LOG
>
» ...to Clipboard
» ...to Printer
» Clear Log
61200226L1-1
Only one configuration transfer session (upload or download) may be active
at a time. The TCP/IP parameters are not saved or overwritten as part of an
ATLAS 800 unit's transferred configuration to allow sending identical con-
figurations to multiple units. When you start this program, a port is auto-
matically opened.
Provides enable, disable, abort, and exit options.
Enables the TFTP server. The IP address displays in the Status field and
Server Ready displays in the Log field.
Disables the TFTP server. When you select this option, the message PORT
CLOSED displays in the Status field and Port Closed displays in the Log
field.
Terminates a transfer that is in progress.
Terminates active transfers and closes the TFTP window.
Provides print options.
Copies the information in the Log field to the clipboard. You can then open
any word processor and paste the information into the program for review.
Sends the information in the Log field to the default printer.
Deletes the information stored in the Log field.
PLUS
ATLAS 800
Chapter 13. ADTRAN Utilities
Figure 13-6. TFTP Server Interface
User Manual
13-11