Planmeca PlanMill 40 S User Manual page 8

3 SYMBOLS ON PRODUCT LABELS
3.1.2 Attention labels
External components and connectors
3.1.3 Protected earth ground label
4 Planmeca PlanMill 40 S
Attention labels are located in numerous places on the
Planmeca components. These labels direct you to
specific safety entries in this user manual. Adhere to all
such safety warnings at all times.
When connecting external components to the Planmeca
system, attach only components that have been tested for
compliance with IEC 60601-1 or UL 60950.
Connectors for attaching external devices conduct low
voltages. Avoid touching the connector pins.
The Protected Earth Ground label is attached to the
milling unit under the cover as shown.
User's manual