Planmeca PlanMill 40 S User Manual page 21

8.8.2 Broken tools and restoration inspection
User's manual
8 OPERATING THE MILLING UNIT
If a conical tool breaks halfway instead of at the shoulder,
the broken tool may not be detected right away. If the
broken tool continues to mill, it can cause damage or put
black marks on the restoration.
By default, the new Restoration Inspection feature is
activated.
If a tool breaks:
The lid lights turn blue and the lid pops open
The operator assesses the restoration and closes the lid
Once the lid is closed, a new message displays.
If the restoration has black marks or has come off of the
mandrel, click No. The lid pops open. Remove the block.
Select the job to restart milling. The system will prompt
you to insert a new block at the beginning of the restarted
milling process.
To continue milling with a new tool, click Yes.
To deactivate this feature, contact Customer Support.
Planmeca PlanMill 40 S 17