Table of Contents
Advertisement
8 OPERATING THE MILLING UNIT
8.8.3 Replacing / inserting tools
18
Planmeca PlanMill 40 S
If a needed tool is not already in the tool changer, the
Tool(s) not available
message
The reasons for replacing a tool include:
•
Tool(s) needed for the restoration are not in the tool
changer.
•
Fill empty slots in tool changer.
•
Tool in spindle is broken.
•
Tool is too worn down to use.
1.
To replace the tool on the main screen, touch
Options.
2.
Touch Tool Manager.
3.
Touch the desired tool or empty slot to see more
information and options.
The tool or empty slot changes color when selected.
4.
Select the desired option and follow the on-screen
instructions.
•
Put in Spindle - move a tool from the tool
changer to the spindle
•
Put tool away - move a tool from the spindle to
the tool changer
•
Remove from the milling unit - take tool out of the
milling unit and leave this spot empty
•
Replace this tool - remove this tool from the
milling unit and replace with a new one
•
Measure this tool - calculate the length of the tool
•
Verify tools - displays screen to visually inspect
all tools and change tool types in the software if
needed
When placing a new tool in the collet, ensure it is
pushed all the way in (fully seated). The system
measures new tools and suggests a tool shape.
Select a different tool type if necessary.
5.
Close the lid when finished.
will appear.
User's manual
Advertisement
Table of Contents
