Checking The End Of A Recorded Scene (Recording Check Function); Searching For A Tape Position Before The End Of The Last Recording (Camera Search Function); Eee - Panasonic NV-VS3A Operating Instructions Manual

/ — SEARCH SEARCH + \
jae >> \
Checking the End of a Recorded |
Scene (Recording Check Function)
By automatically playing back the final 2 seconds
(approximate) of the last recorded scene, this function lets you
check if a just finished scene has been recorded correctly.
When you then start recording the next scene, it is
automatically joined with a smooth transition free from picture
distortion. For especially important scenes, use this function
fram time to time for confirmation.
1 Press the [[G]] Button briefly in the Recording
Pause Mode.
The [CHK] Indication @} appears and the final
approximately 2 seconds of the last recorded scene are
played back.
After that, the Movie Camera returns to the Recording
Pause Mode and is ready for recording the next scene.
({CHK] means Check.)
Searching for a Tape Position Before the End
of the Last Recording
(Camera Search Function)
This function makes it easy to search for a point ina
previously recorded scene or cassette from which you want to
start recording a new scene. In addition, it ensures smooth
scene-to-scene transitions free from picture distortion.
2 Keep the [~SEARCH] Button (or the
[SEARCH-+] Button) pressed in the Recording
Pause Mode.
@: Reverse Search
©: Forward Search
33