Using The Password Feature; Figure 36 The "Set Pass" Button; Figure 37 Setting The Password; Figure 38 Entering The Password - Z3 Technology Z3-MVE-10 User Instructions

8.3 Using the Password Feature

(1) In the top right corner, click on "set pass":
(2) A "pass" and "again" window appear. Enter the password twice and click "change":
(3) An authorization window will appear after the password is successfully registered. Type "admin" for
the User Name and the password you have just entered and click "Ok":
(4) Exit the browser and restart it (or create another browser window). In the new browser, enter the IP
address of the Z3-MVE-10. When you do so, the same authentication window that appeared in step
(3) will appear. Enter "admin" and the password as you did previously.
____________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N. 8th St. STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
Click here

Figure 36 The "set pass" Button

Figure 37 Setting the Password

Figure 38 Entering the Password

34
DOC-USR-0080-01
(1) Enter new
password
twice
(2) Click
"change"