Dynamically Changing Bitrate/ Frame Rate; Figure 20 Changing Bitrate On The Fly - Z3 Technology Z3-MVE-10 User Instructions

6.7 Dynamically Changing Bitrate/ Frame Rate

It is possible to change two parameters in the middle of an encoding session:
(1) Video Bitrate
(2) Frame Decimation
To change these, simply enter the new desired value and then click the "Start Encoder" button.
The web page will respond with the following message:
Status: Changed rate
The video stream will then continue interrupted with the new parameter.
____________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N. 8th St. STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702

Figure 20 Changing Bitrate on the Fly

19
(1) Change bitrate
(2) Click "Start Encoder"
(3) "Changed rate" appears in Status area
DOC-USR-0080-01