Basic Operating Procedures; Selecting The Language Displayed In The Menus And Dialog Boxes - Kongsberg Simrad CS90 Reference Manual

Basic operating procedures

Topics
Selecting the language displayed in the menus and dialog boxes, page 71
Selecting operating frequency for minimum noise, page 72
Hiding the menu system when you do not need it, page 73
Saving single or sequential screen captures, page 74
Saving the current user settings, page 75
Defining the ping (transmission) modes, page 76
Selecting the language displayed in the menus and dialog
boxes
You may prefer to use the CS90 system with the user interface in your own language. The
function allows you to select the language to be used in the display presentations,
Language
menus and dialog boxes.
Context
With a few exceptions, the chosen language will also be used for all other texts in the user
interface. The context sensitive online help may not be available for the language you
choose. If your language is not supported, the English help is provided.
Procedure
1 Open the
Setup
2 Select the middle of the
3 Select the language you wish to use.
Result
All the texts in the user interface are changed to the selected language.
The context sensitive on-line help may also be available in your language. To change the
language in the on-line help, you may need to restart the CS90 system.
442700/A
menu.
button to open the list of available options.
Language
Getting started
71