Table of Contents
Advertisement
Simrad CS90 Reference Manual
reference units, or other hydroacoustic systems. If you have enabled
text box is continuously updated with new information.
Auto Update
When this function is activated, the relevant text box is continuously updated with
new information. If you wish to "freeze" the information for further investigation,
deactivate to disable the automatic update.
Hex Display
Select this to show the information in the relevant text box in hexadecimal format.
Delete
This function clears the text box to allow a new stream of communication data to
start on a blank page.
Current Port
This box identifies the port you are currently monitoring.
Tip
If you wish to change your attention to a different serial or LAN port, you can choose
the communication port here instead of returning to
Related topics
Setting up the interfaces to peripheral devices, page 195
I/O Setup page, page 511
Functions and dialog boxes, page 413
Secondary functions and dialog boxes, page 489
Messages dialog box
The
dialog box allows you to read and acknowledge the messages.
Messages
How to open
To open the
Messages
message is issued by the CS90 system,
colour of the triangle reflects the severity of the most serious message. If you hold
the cursor over the triangle, a short list of the current messages is shown.
500
dialog box, select
Messages
Messages
.
I/O Setup
on the top bar. When a new
on the top bar will flash. The
, the
Auto Update
442700/A
Advertisement
Table of Contents
