Error Messages - Leibinger Jet 2 Manual

Group 8

8.3 Error messages

Description of the malfunction
Risk of fire!
Combustible gases and liquids cause serious burns. Sources of
ignition must be kept away from the print head!
Risk of crushing/piercing!
During the closing movement of the print head your fingers could
get caught between deflector unit or nozzle plate and gutter or
during the opening movement between housing and gutter. Keep
your hands outside of the danger area!
Dangerous electrical voltage!
Contact causes serious damage through an electric shock! The print
head must close automatically. Work on the head must only be
carried out in a closed state!
Risk of injury!
Ink escapes from the head aperture. Spraying of ink into the eyes
can cause blindness. Eye protection is necessary!
This work must only be carried out by trained personnel or by
Leibinger service technicians!
Opening/closing of the gutter not carried out
correctly. Closing mechanism could be dirty or
defective.
Display message:„an error occured when head moved, gutter moved not
correct. Check the mechanics for gutter-movement"
Drop brake-off error! The charging electrode
could be dirty. If necessary please clean.
Display message:„not able to adjust drop generation, please check
charge electrode for dirt accumulation. Clean, if necessary"
Charging electrode
clean or replace.
Display message:„charge elect. Dirty please check charge electrode for
dirt accumulation, clean, if necessary"
Release 3.00
Trouble shooting
dirty/defective. Please
Trouble shooting activity
Check closing mechanism. Remove ink
residue and other contamination with a
cleaning brush.
Check charging electrode and clean.
Check charging electrode and clean or
replace.
Page 126
Leibinger-Jet 2 se