Connecting The Measuring Device - Endress+Hauser Proline Prosonic Flow B 200 Operating Instructions Manual

Electrical connection
å 5 Example of a nameplate on the I/O electronic module
1 Information on the outputs and their terminal assignment
7.1.5 Preparing the measuring device
1. Remove dummy plug if present.
2. NOTICE! Insufficient sealing of the housing. Operational reliability of the measuring
device could be defeated. Use suitable cable glands corresponding to the degree of
protection.
If measuring device is delivered without cable glands:
Provide suitable cable gland for corresponding connecting cable (® ä 19).
3. If measuring device is delivered with cable glands:
Observe cable specification (® ä 19).
7.2

Connecting the measuring device

NOTICE
Limitation of electrical safety due to incorrect connection!
For use in potentially explosive atmospheres, observe the information in the device-specific
►
Ex documentation.
20
1 1 1
2-wire / Flow
HART
[04/05]
3 4
Proline Prosonic Flow B 200
1
Spare part
71108602
1 2
A0013703
Endress+Hauser