Workplace Safety; Operational Safety; Product Safety - Endress+Hauser Proline Prosonic Flow B 200 Operating Instructions Manual

Basic safety instructions
2.3

Workplace safety

For work on and with the device:
Wear the required personal protective equipment according to federal/national regulations.
►
For welding work on the piping:
Do not ground the welding unit via the measuring device.
►
2.4

Operational safety

Risk of injury.
Operate the device in proper technical condition and fail-safe condition only.
►
The operator is responsible for interference-free operation of the device.
►
2.5

Product safety

This measuring device is designed in accordance with good engineering practice to meet state-
of-the-art safety requirements, has been tested, and left the factory in a condition in which they
are safe to operate.
It fulfills general safety requirements and legal requirements. It also conforms to the EC directives
listed in the device-specific EC declaration of conformity. Endress+Hauser confirms this fact by
applying the CE mark.
6
Proline Prosonic Flow B 200
Endress+Hauser