Endress+Hauser Proline Prosonic Flow B 200 Operating Instructions Manual page 25

Proline Prosonic Flow B 200
8.2.1 Operational display
Status area
Status signals
A0013956
Failure
Diagnostic behavior
A0013961
Alarm
Display area
Measured variables
Symbol Meaning
• Volume flow
• Corrected volume flow
A0013711
Energy flow
A0016223
Methane fraction
A0016225
Gross calorific value
A0016224
Wobbe index
A0016226
Temperature
A0013947
Totalizer
A0013943
Current output
A0013945
Symbols for measurement channel numbers
Measurement channel 1 to 4
A0016325
The measurement channel number is displayed only if more than one channel is present for the same measured variable
type (e.g. Totalizer 1 to 3).
Symbols for diagnostic behavior
The diagnostic behavior pertains to a diagnostic event that is relevant to the displayed measured variable.
For more information about the symbols, refer to the "Status area" section (® ä 25).
Endress+Hauser
A0013959
Function check
A0013962
Warning
The measurement channel number indicates which of the three totalizers is displayed.
The measurement channel number indicates which of the two current outputs is
displayed.
A0013958
Out of specification
Locking
A0013963
Device locked
options
A0013957
Maintenance required
Communication
A0013965
Remote operation enabled
25