GE Healthcare Brivo XR118 Service Manual page 271

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION
Click the detector Management icon [
in the system.
To associate a "Non-associated":
1. Selects a non-associated detector from the detector list which has been boot
up.
2. Clicks "Associate" button to make it as associated detector.
3. After the detector association is done. The detector is marked with asterisk
as associated detector. The prior associated detector changes to
nonassociated.
 After detector associated with the system, if the detector FW version not
 When system uploads the detector calibration data, there shall be a
To identify a detector
1. Click the [Identify] button to confirm the wireless connection of the
associated detector.
 [Identify] button will be active only when associated detector is
 Prior to identifying the associated detector, the detector should be
2. The
identification is successful.
 If the associated detector is in sleep mode, the identify process will
 If there is a detector communication error, the identify process will
To release an associated detector
1. Selects the associated detector from the detector list which has been boot
up.
 When the associated detector is selected, the "Associate" button
2. Click the [Release] button.
3. A pop up box will be displayed requiring your confirmation. Click [Yes] to
proceed.
6
EVISION
compatible, the system shall display FW incompatible message in the
system inhibit message bar.
message indiates that detector calibration data upload is in progress in
the system inhibit message bar.
selected.
successfully boot up and wirelessly connected to the system.
associated Detector
indicate user that the associated detector is not available. Please refer
to Chapter 5: Detector Operation
indicate user of the identification failure.
changes to "Release".
Chapter 12 - - Set Preferences
] to list all the detectors registered
connection LED blinks
to wake up the detector.
B XR118 S M
RIVO ERVICE ANUAL
for 15 seconds
Page 271
if