GE Healthcare Brivo XR118 Service Manual page 224

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION
12.) I do not want to display the patient orientation frame on the image
13.) How to auto delete the images in the database
14.) I want the image acquired automatically sent to PACS
15.) How to switch to OS GUI.
16.) How to copy Snapshots into USB key.
17.) How to change route if PACS IP and IDR IP are not in the same IP segment
Page 224
6
EVISION
Solution:
i.) Check the exposure techniques is appropriate
ii.) Check the maximum exposure timeout is set appropriate
iii.) Check the grid of the target system, configure the Gridline remove in Utilities
Solution:
i.) Configure in Utilities->viewer-> Patient orientation-> OFF
Solution:
i.) Go to Utilities-> Image Management-> Auto-delete
Solution:
i.) Go to Utilities-> Image Management->Auto-Send-> ON, all the tagged images will be
auto-sent to the configured PACS.
Solution:
Input nautilus in command window, then press Alt+Shift+Esc to switch between windows. FE
can copy files in Linux OS GUI.
Solution:
i.) Plug USB disk into USB port of workstation.
ii.) Press Ctrl+Shift+F5 to open ENGGUI and open command line window, type mount /dev/
sdb1 /mnt/usbdisk.
iii.) Type command line: cd /enggdata/Snapshots/ in command line.Type ls to list all
snapshots.
iv.) Type command line: cp xxxx /mnt/usbdisk/ to copy selected snapshot into USB disk, xxxx
is the name of snapshots.
v.) Type command line: ls /mnt/usbdisk/ to confirm snapshot copy action is successful.
vi.) Type command line: superuser su and relate password.
vii.) Type command line: umount /mnt/usbdisk/ to unmount USB disk, then pull out USB disk
from workstation.
Solution: Need add route in IDR workstation:
i.) Type command line: vi /etc/sysconfig/network-scripts/ifcfg-eth0 in command line window
Section 6.0 - Q&A
B XR118 S M
RIVO ERVICE ANUAL