GE Healthcare Brivo XR118 Service Manual page 280

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION
Auto Tag (Quality Check)
Enabling Auto Tag (or Quality Check) provides an indicator on the Image Viewer
screen to mark an image of acceptable quality. Auto Print and Auto Delete can be
configured to act upon images that have the Quality Check mark.
There is no configuration for this function; it is either enabled (On) or
disabled (Off).
Follow this process to enable or disable Auto Tag:
1. From the Worklist screen, click utilities button [
2. Select
3. Click Auto Tag [On] to enable the function.
 Auto Tag [Off] disables the function.
Auto Print
Default Print/Auto Print
parameters. This is done so that you do not need to select all the parameters
each time you print an image.
Follow this process to configure Auto Print.
1. From the Worklist screen, click utilities button [
2. Select
3. Click Auto Print [Edit].
 The Default Print/Auto Print screen appears.
4. Complete the information as described in
5. When finished, click [Save] to retain your changes.
Page 280
6
EVISION
Preferences > Image Management
(Figure
Preferences > Image Management
Chapter 12 - - Set Preferences
.
12-24) allows you to configure your printer
.
Table
Figure 12-24
Auto Print
B XR118 S
RIVO ERVICE
].
].
12-9.
M
ANUAL