GE Healthcare Brivo XR118 Service Manual page 286

GE H
EALTHCARE
D 5461425-8EN, R
IRECTION
Image Processing
The Image Processing preferences allow you to view the settings of default
factory looks or to create up to five (5) custom looks. Image Processing
Preferences also allow you to change which look is the default for the
anatomical view.
Change Default Factory Looks for Exams
The Default Factory Looks screen (Figure 12-28) allows you to change the
default processing setting for all 34 representative anatomical views, and then
map this change to related anatomical views. Note that this may over-ride
existing default settings.
At the initial applications setup, the radiologist chooses the default look for
each anatomical view. Application specialists assign the looks to the system.
Follow this process to change the default factory looks.
1. From the Worklist screen, press utilities button [
2. Select Preferences > Image Processing.
3. Press Default Factory Looks [Edit].
4. Use the drop-down lists to change the default for the desired anatomical
views.
Page 286
6
EVISION
Figure 12-27
Chapter 12 - - Set Preferences
Preferences - Image Processing
B XR118 S M
RIVO ERVICE ANUAL
].